Base Marker 5ml

BASE MARKING: Rubber base in a new marker format with a thinner formula. Modern format for flawless technique!

Rubber Base is a transparent, universal base with a liquid consistency, designed as a substrate for hard materials and color bases.

Marking features:

• Application precision: controlled product quantity for even application.
• Economic efficiency: rational use of the product without excessive costs.
• Speed ​​of operation: natural movements, similar to holding a pen for quick application.

Properties of the base:

• The consistency is liquid (has a thinner formula than the Standard LUNAmoon Rubber Base ).
• It has an acidity of 3–4 pH.
• May cause a warm and burning sensation on injured and very thin nails (not on healthy nails).
• Intended as a substrate for hard materials and paint bases.
• The lamp power for drying the base is 36-48 W. The lamp must be original.
• Adhesion depends 100% on the correct application technique.
• It can be perfectly removed by sawing or with liquid.
• It is hypoallergenic and odorless.

Type of application:

1. Distance.
2. We do not file the shape of the nail and do not leave it 2 mm long, which we remove after alignment.
3. Using a 220 grit file, we apply a fine dusting of the nail from above, without applying excessive pressure, by lifting the scales of the nail plate, or use a 100 grit buff.
4. We do a manicure.
5. When working with removers, wash your hands with soap and water after use.
6. Degrease the nail with Nail Prep LUNAmoon . We follow two approaches. We use four wipes (one for five fingers). The first approach: Wipe the surface of the nail. The second approach: Take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sinuses.
7. Wear Ultrabond LUNAmoon (optional). Before application, it is important to wipe the brush with a lint-free cloth to remove any excess. Apply Ultrabond to 5 fingers with a semi-dry brush. Wait 1 minute until it is absorbed into the nail plate.
8. Inner lining with BASE MARKER rubber base . Apply to the nail plate and cure in a lamp for 60 seconds.
9. Eliminate stickiness.
10. We cover and level it with any material to make it comfortable: a color base or a gel for extension. Dry in a lamp for 120 seconds.
11. After leveling, we file the shape. This is necessary to create a thickness at the edge of the nail that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to trim 1 mm of natural nail from the inside. In this case, the material won't peel off. If the material is hard and the nail is very soft, the nail itself will begin to peel off the hard material from the free edge.
13. After sawing, wipe off the stickiness and cover with a thin layer of gel polish or camouflage base.
14. Cover with top. Let it dry for 120 seconds. Do not wipe with anything after drying, as this may cause the shine to disappear.

Important: Do not leave the marker open. Close the cap tightly after use. Avoid UV/LED rays on the product. Store in a dark place away from direct sunlight.

Product shelf life: 24 months. Do not store for longer than 12 months.
TPO FREE(
Product photos on the website may differ from the actual product)