Luna Light Acrygel 63

Liquid Light Acrylic Gel is an innovative material for strengthening, smoothing and lengthening nails.
Light Acrygel is a symbiosis of polygel and basecoat. It consists of more than half (60–80%) acrylic copolymer, the main component of polygel, and a small proportion (approximately 20–30%) of hydroxyethyl methacrylate (HEMA), the main component of basecoats.
It can completely replace the base coat.

Features:

• Wavelength for polymerization: 365–405 nm.
• UV/LED lamp power: 36-48 W.
• Permissible layer thickness: 0.5 mm at the edge / 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Complete polymerization in 120 seconds.
• Only suitable for nail strengthening and lengthening.
• Has good shock absorption.
• When using this gel for strengthening, it is necessary to file the natural nail.
• Requires a base made of Rubber Base LUNAmoon .
• To make the gel more fluid, it can be heated additionally.

Application procedure:

STRENGTHENING:

1. Distance.
2. Don't file the nail shape. Alternatively, you can leave 2 mm of nail shape, which can be filed and removed after leveling.
3. Carefully file the nail from the top with a 220-grit file, removing any chipped nail plate. Alternatively, you can use a 100-grit polisher.
4. Manicure.
5. If you use remover, wash your hands with soap and water after use.
6. Degrease the nail with Nail Prep LUNAmoon Two approaches are required. Use four wipes, one for five fingers. The first approach: Wipe the surface of the nail. The second approach: Take an orangewood stick, wrap it in a wipe, and wipe everything in the cuticle area and nail folds.
7. Wear Ultrabond by LUNAmoon (optional). Before application, it is important to wipe the brush on a lint-free cloth to remove excess material. Apply Ultrabond with a semi-dry brush to all five fingers (free edge and lateral parallels). Wait 1 minute until the bond is absorbed into the nail.
8. Base with Rubber Base LUNAmoon It's best applied with a flat gel brush. The strokes should be smooth. It's important to line all the nail recesses. Cure for 60 seconds.
9. Remove any stickiness. Align. I would like to emphasize that when leveling with gel, a gap of 0.5–1 mm must be maintained from the cuticle. Cure in the lamp for 60 seconds.
10. Polish the mold after leveling. This is necessary to create a thickness at the edge that supports the free edge.
11. Dust off the molds after leveling. This is necessary to create a final nip that holds the free edge.
12. After filing, remove the stickiness.
13. Apply gel nail polish if desired.
14. Apply topcoat and let it cure for 120 seconds. Do not wipe off after curing, as this may impair the shine.

CLASSIC NAIL EXTENSIONS:

1. Distance.
2. Trim the nail length to 1 mm and shape it into a round shape.
3. Carefully file the nail from the top with a 220-grit file, removing any chipped nail plate. Alternatively, you can use a 100-grit polisher.
4. Manicure.
5. I If you use remover, wash your hands with soap and water after use.
6. Degrease the nail with Nail Prep LUNAmoon Two approaches are required. Use four wipes, one for five fingers. The first approach: Wipe the surface of the nail. The second approach: Take an orangewood stick, wrap it in a wipe, and wipe everything in the cuticle area and nail folds.
7. Apply Lunamoon Primer.
8. Base with Rubber Base LUNAmoon It's best applied with a flat gel brush. The strokes should be smooth. It's important to line all the nail recesses. Cure for 60 seconds.
9. Remove stickiness.
10. To extend the free edge, place a nail stencil on top.
11. Fill the nail mold with clear artificial nail gel. Let it cure for 30 seconds.
12. File the free edge and shape it as needed.
13. Wipe off any stickiness and excess dust.
14. Wear another layer Rubber Base Apply to the filed areas. Let it harden for 30 seconds.
15. Smooth the gel over the nails, place them in the lamp, and press for 10–15 seconds. For very sticky gel or glitter, press for 20 seconds.
16. Cure in the lamp for 120 seconds.
17. Before applying the gel nail polish, wipe off any stickiness.
18. Apply topcoat and let it cure for 120 seconds. Do not wipe off after curing, as this may impair the shine.

Durability: 24 months. Once opened, store for a maximum of 18 months.

TPO-FREE
(Product photos on the website may differ from the actual product)